Tech

ENIGMA BAZAAR:  TECH SPECS 2022

STAGE:

  • 8’ Deep  x  16’ Wide  x  16” Height;  10-11.5’ vertical clearance (stage deck -> floor)
  • Stage is “modular” and breaks apart in 4’x4’ sections (full orientation is carpeted)
  • Power = UpStg “Aux 4” 1 x 20 Amp circuit (split 2 black Furman surge strips UpStg L&R)
  • A-19 House Right (near sprinkler control valve sign) = 1 x 20 Amp Circuit (use for tube amps, extra fixtures etc)

AUDIO:

Mains – 2 x QSC K12

1000 Watts RMS

75° Conical Coverage

Delays – 2 x QSC K10

1000 Watts RMS

90° Conical Coverage

Delay Time – 6ms/9ft

Subs – 2 x QSC KS212C

1800 Watts RMS (3600 W Peak per Unit)

180° Cardioid (15dB Rear Rejection)

Processing – DBX DriveRack PA2

Full Range 3 Way (Stereo Sub)  “#75: EB.3WaywST.Sub” (file name)

GEQ Tune – Details Available

Xover – 100Hz Subs / Mains Band Pass 100Hz – 4kHz / Delays Band Pass 1kHz – 20kHz

FOH Console – Allen & Heath Qu-16 (16 preamp inputs + 2 x TRS)

Alt. Out available

Multi-track available (interface not provided)

Snake – A&H AB168 CAT5e Stage Box (analog backup available)

Monitors – 3 x QSC K10 (isolated mixes)

1 x Mono Mix available (spkr not provided)

2 x Stereo Mixes available (IEM not provided)

Power – House Left & House Right = 1 x 20 Amp Isolated Circuit Each:  Furman PL-Pro C per side

Booth = 1 x 20 Amp Isolated Circuit (Furman PL-Pro C) + 2 x 20 Amp Circuits Additional

Mics

2 x Shure sm58

2 x Shure sm57

1 x Shure sm58 w/ Switch

1 x Shure Beta58

3 x Sennheiser e604

1 x Electro Voice ND68

2 x EV ND66 (48v)

1 x Shure 55SH II

1 x Shure Beta58 Wireless HH

1 x Shure BLX H9 Cheek Mic

3 x mic afros

Direct Box

2 x Radial Mono Passive

1 x Radial Stereo Passive

1 x Boss Mono Active

1 x Rapcohorizon XLR -> mini TRS

Stands

5 x tall telescoping boom

2 x short telescoping boom

3 x straight tall

2 x straight short

Cables

20 x 25’ XLR

4 x TS (varied length)

1 x RCA -> TRS

2 x male XLR -> TRS

1 x 3.5mm -> 3.5mm (Apple dongle)

1 x short TS right angle (for DIs)

LIGHTING:

Controller – ENTTEC DMX -> USB Pro MkII

Lightkey Software on MacBook Air (M1 chip, 2020)

Fixtures

Upstage:  2 x Monoprice PAR StageLight (RGBAW-UV)

Upstage:  4 x StageRight Tri-Color LED Bar (on floor)

Wings Upstage:  (House Left & House Right) 1 x PAR StageLight

Wings Downstage:  (House Left & House Right) 1 x PAR StageLight

Downstage LightBar:  2 x SlimPar Pro H

Downstage LightBar:  2 x SlimPar H6

Downstage LightBar:  2 x Chauvet EVE E-50z (LED spots)

** all static; no movers, no haze

PASSWORDS:

N/A

INVENTORY:

Full Stage Cable Package (stored in square milk crate under booth)

  • 3 x IEC Blue Locking Dpin (IEC) for QSC K10 stage monitors
  • 3 x Black Tip XLR (for stage outputs only)
  • 1 x Black 25’ Edison w/ green tri-tap (for downstage monitors)
  • 1 x Black 25’ Edison w/ outlet strip (for A-19 aux. downstage power)
  • 1 x Black 15’ Edison
  • 1 x Black plywood (for leveling 3’x8’ downstage monitor deck)
  • 2 x velcro cable keeps

DRIVE RACK SETTINGS:

File Name:  Full Range 3 Way (Stereo Sub)  “#75: EB.3WaywST.Sub”

GEQ

HzdB(-/+)HzdB(-/+)kHzdB(-/+)kHzdB(-/+)
200160-31-28-3
25020001.250100
31.50250-61.6012.5-3
400315-4.52-3160
50040002.5-6200
63-350003.15-6
80-4630-24-1
100-6800-55-2
125-2.56.3-1.5

X-OVER

Highs (2x Delays K10)

HighPass:  1kHz, Buttersworth 24

LowPass:  Out

Mids (2x Mains K12)

HighPass:  100Hz, Buttersworth 48

LowPass:  4kHz, Buttersworth 24

Lows (2x Subwoofer KS212c)

HighPass:  Out

LowPass:  100Hz, Buttersworth 48